عنوان مقاله [English]
نویسندگان [English]چکیده [English]
In this work, a powder with specific chemical and physical characteristics was used and the effect of different additives on grain growth and densification of UO2 pellets were studied. The mixture of powder and additives was pressed and then sintered under hydrogen atmosphere for 6 hours at 1700֩C. The Cr2O3 additive not only increased densification but also severely increased the grain size. Other additives had little effect on grain growth of the nuclear fuel pellets. Sintering behavior and Coarse-grained microstructure formation are discussed in terms of the reduction of Cr2O3 to Cr, the dissolution of Cr2O3 in UO2 and sintering.
 C.T. Walker, T. Kameyama, S. Kitajima, M. Kinoshita, Concerning the microstructure changes that occur at the surface of UO2 pellets on irradiation to high burnup, J. Nucl. Mater., 188 (1992) 73-79.
 J.C. Killeen, Fission gas release and swelling in UO2 doped with Cr2O3, J. Nucl. Mater., 88 (1980) 177-184.
 H. Assman, W. Dorr, Microstructure and density of UO2 pellets for light water reactors as related to powder properties, Ceramic powders, Edited by P. Vincenzini. Elsevier Scientific Publishing company, Amsterdam, (1983) 707-718.
 K. Une, I. Tanabe, M. Oguma, Effects of Additives and the oxygen potential on the fission gas diffusion in UO2 fuel, J. Nucl. Mater., 150 (1987) 93-99.
 L. Bourgeois, P. Dehaudt, C. Lemaignan, J.P. Fredric, Pore migration in UO2 and grain growth kinetics, J. Nucl. Mater., 295 (2001) 73-82.
 S. Kashibe, K. Une, Effect of additives (Cr2O3, Al2O3, SiO2, MgO) on diffusional release of 133Xe from UO2 fuels, J. Nucl. Mater., 254 (1998) 234-242.
 P.T. Sawbridge, C. Baker, R.M. Cornell, K.W. Jones, D. Reed, J.B. Ainscough, The irradiation performance of magnesia-doped UO2 fuel, J. Nucl. Mater., 95 (1980) 119-128.
 H. Assmann, W. Doerr, M. Peehs, Oxide fuels with controlled microstructure, J. Am. Ceram. Soc., 67 (1984) 631-636.
 R.N. Singh, Isothermal grain- growth kinetics in sintered UO2 pellets, J. Nucl. Mater., 64 (1977) 174-178.
 Letter to the editors, Grain growth in high density UO2, J. Nucl. Mater., 148 (1987) 351-352.
 W.I. Stuart, R.B. Adams, Effects of sintering atmosphere on the density of uranium dioxide pellets, J. Nucl. Mater., 58 (1975) 201-204.
 P. Balakrishna, B.N. Murty, K.P. Chakraborthy, R.N. Jayaraj, C. Ganguly, Coarsening- densification transition temperature in sintering of uranium dioxide, J. Nucl. Mater., 297 (2001) 35-42.
 L. Bourgeois, P. Dehaudt, C. Lemaignan, A. Hammou, Factors governing microstructure development of Cr2O3-doped UO2 during sintering, J. Nucl. Mater., 297 (2001) 313-326.
 K.S. Kim, K.W. Song, J.H. Yang, K.W. Kang, Y.H. Jung, Sintering behavior of Cr2O3-doped UO2 pellets, J. Kore. Nucl. Soc., 35 (2003) 14-24.
 T.B. Lindemer, T.M. Besman, Chemical thermodynamic representation of < UO2±x>, J. Nucl. Mater., 130 (1985) 473-488.
 H. Assmann, W. Dorr, M. Peehs, Control of UO2 microstructure by oxidative sintering, J. Nucl. Mater., 140 (1986) 1-6.
 F. Glodeanu, M. Spinzi, V. Balan, Correlation between UO2 Powder and pellet quality in PHWR fuel manufacturing, J. Nucl. Mater., 153 (1988) 156-159.
 T.R.G. Kutty, P.V. Hegde, K.B. Khan, S. Majumdar, D.S.C. Purushotham, Sintering studies on UO2-PuO2 pellets with varying PuO2 content using dilatometry, J. Nucl. Mater., 282 (2000) 54-65.
 K.W. Song, K.S. Kim, Y.M. Kim, Y.H. Jung, Sintering of mixed UO2 and U3O8 powder compacts, J. Nucl. Mater., 277 (2000) 123-129.
 Y.W. Lee, M.S. Yang, Characterization of HWR fuel fabricated using UO2 powders from different Conversion processes, J. Nucl. Mater., 178 (1991) 217-226.
 P. Das, R. Chowdhury, Studies on the sintering behavior of Uranium dioxide powder Compacts, J. Nucl. Mater., 158 (1988) 61-266.
 J.B. Aiscouch, F. Rigby, The effect of magnesia on the grain structure of sintered uranium dioxide, Ceramic powders, Edited by P. VinCenzini. Elsevier Scientific Publishing company, Amsterdam, (1983) 921-927.
 K.C. Radford, J.M. Pope, UO2 fuel pellet microstructure modification through impurity additions, J. Nucl. Mater., 116 (1983) 305-313.
 L. Mazeina, A. Navrotsky, M. Greenblatt, Calorimetric determination of energetics of solid solutions of UO2+x with CaO and Y2O3, J. Nucl. Mater., 373 (2008) 39–43.
 R. Massih, Effects of additives on uranium dioxide fuel behavior, Quantum Technologies AB, Uppsala, Sweden, 2014.
 N.Y. TOKER, L.S. DARKEN, A. MUAN, Equilibrium Phase Relations and Thermodynamics of the Cr-O System in the Temperature Range of 1500˚C to 1825˚C, Metallurg. Transact. B, 22B (1991) 225-232.
 J.H. Yang, K.S. Kim, I.H. Nam, J.S. Oh, D.J. Kim, Y.W. Rhee, J.H. Kim, Effect of step wise variation of oxygen potential during the isothermal sintering on the grain growth behavior in Cr2O3 doped UO2 pellets, J. Nucl. Mater., 429 (2012) 25–33.
 T. Cardinaels, K. Govers, B. Vos, S.V.d. Berghe, M. Verwerft, L.d. Tollenaere, G. Maier, C. Delafoy, Chromia doped UO2 fuel: Investigation of the lattice parameter, J. Nucl. Mater., 424 (2012) 252–260.
 R.A. Rahimi, M. Iravani, M. Mohammadifar, Study on swelling caused by fission products in UO2 nuclear fuel pellets, Final project report, Material Research School, Nuclear Science and
Technology Research Center, (1391).
 R.A. Rahimi, M. Iravani, M. Mohammadifar, Research and study the factors affecting the increase of burn up of UO2 pellets, Final project report, Material Research School, Nuclear Science and Technology Research Center, (1391).